setup Archives - BONGERS.IT

Huawei OceanStor basics

Initial Setup Array

Default username and password: admin / Admin@storage
Connect using serial speed 115200

Set Management IP Address

Execute the following command to identify the current ip addresses and the name of the interfaces:
# show system management_ip

To change the ip address use the following command:
# change system management_ip eth_port_id=CTE0.MGMT0.0 ip_type=ipv4_address ipv4_address=192.168.190.2 mask=255.255.0.0 gateway_ipv4=192.168.0.1

Restart management services

Restart Management Process on SPs
Open the setup page on BOTH Storage Processors

https://IP_address_SPA/setup

https://IP_address_SPB/setup

scroll down to the “Restart Management Server” button and simultaneously click on the box for the Management Server to restart,
Log back into Navisphere/Unisphere and check the status;
note: it can take a several minutes before the array can be managed again.